Pemanfaatan Limbah Plastik Sebagai Bahan Penciptaan Patung Miniatur Rusa
DOI:
https://doi.org/10.62383/abstrak.v1i6.388Keywords:
Creation, Miniature Statue, Deer, Plastic WasteAbstract
Sculpture is a field of three-dimensional fine art that has dimensions of height, width, and length. According to M. Susanto in his book Diksi Seni Rupa (2002) Miniature is a model, replica, prototype, and scale model as well as various forms of fine art made in small sizes. The author uses the Assembly Technique which in the manufacturing process uses a tool, namely Solder to melt Plastic Waste. Waste is a very important environmental problem, especially in urban areas to create this work, the author uses the Sp. Gustami creation method. The stages of the process of creating a work of art from this method include: 1.Exploration Stage 2. Improvisation/Experimentation Stage 3. Formation/Manifestation Stage. The results of the creation of this Deer miniature statue produced 12 three-dimensional sculptures of various sizes. The process of creating this sculpture began with determining the design, assembling the frame, wrapping plastic around the frame and then melting it, after that forming the details and footing of the statue so that the statue can stand. after that coloring using a spray car, the last step is to give clear to the statue
References
Afandi, M. A. (2018). Kehidupan spiritual petani sebagai inspirasi penciptaan karya patung miniatur.
Andjela Ritawaemahu, J. T. (2002). Pengabdian tanpa batas di Negeri Itawaka. Indramayu: Adab.
Armando, R. (2015). Penanganan dan pengelolahan sampah. Jakarta: Penebar Swedaya.
Baskoro, D. (2014). Education for sustainable development: Lestari harmoni bersama desa wirausaha.
Bostami, S. (1981). Seni ukir. Semarang: P3T IKIP.
Damayanti, D., et al. (2021). Mandiri belajar tematik SD/MI kelas 6. Jakarta: Brimedia.
Fithri, C. A. (2015). Penerapan unsur patung pada perancangan lansekap. Jurnal Arsitekno, 6(6).
Gustami, S. P. (2007). Butir-butir mutiara estetika timur. Yogyakarta: Prasista.
Jambeck, J. R., et al. (2015). Plastic waste input from land to sea: Science.
Karunistuti, N. (2013). Bahaya plastik terhadap kesehatan dan lingkungan. Swara Patra: Majalah Ilmiah PPSDM Migas, 3(1).
Kastaman, R., & Kramadibarata, A. M. (2007). Sistem pengelolaan reaktor sampah terpadu. Bandung: LPM Universitas Padjajaran.
Milasari, H. S., M., & Jelmanto. (2018). Seni budaya SMP/MTs IX. Jakarta: Pusat Kurikulum dan Perbukuan, Balitbang, Kemdikbud.
Miller, R. M. (1971). Figure sculpture in wax and plaster (2nd ed.). New York: Watson-Guptill Publication.
Munadi. (2008). Media pembelajaran. Ciputat: Gaung Persada (GP) Press.
Nasution, S. R., et al. (2018). Pemanfaatan limbah plastik sebagai kerajinan tangan di Kelurahan Srengseng Sawah Jagakarsa Jakarta Selatan. Jurnal Ilmiah Teknik, 6(2), 117–123.
Neolaka, A. (2008). Kesadaran lingkungan. Jakarta: Rineka Cipta.
Nur Wakhid. (2007). Buku ajar seni patung dasar. Surabaya: FBS Universitas Negeri Surabaya.
Sachari, A., & Trisnawati, S. (1998). Catatan kuliah kamus desain. Bandung: ITB.
Salam, S., et al. (2020). Pengetahuan dasar seni rupa. Makasar: Universitas Negeri Makasar.
Shihab, M. Q. (2022). Peran, kesan, dan keserasian Al-Qur’an. Retrieved from https://ia801806.us.archive.org/13/items/tafsir-al-mishbah-prof-dr-m-quraish-shihab-/Tafsir%20Al-Mishbah%20Jilid%2008%20-%20Dr.%20M.%20Quraish%20Shihab-Pages-Deleted.pdf
Sugiyono. (2013). Metode penelitian kuantitatif, kualitatif dan R&D. Bandung: Alfabeta CV.
Sumarsono. (2014). Modul seni patung dasar. Jurusan Seni Rupa FBS Unimed Wiki Media Indonesia.
Sunarsih, L. E. (2018). Penanggulangan limbah. Deepublish.
Suriawiria, U. (2002). Pupuk organik kompos dari sampah, bioteknologi argoindustri. Bandung: Humaniora Utama Press.
Susanto, M. (2002). Diksi rupa: Kumpulan istilah seni rupa. Yogyakarta: Kanisius.
Susanto, M. (2004). Menimbang ruang menata rupa. Yogyakarta: Galang Press.
Susanto, M. (2011). Diksi rupa: Kumpulan istilah dan gerakan seni rupa. Yogyakarta: Dicti Art Lab & Jagad Ard Space Bali.
Totf, A. (1983). Modelling and sculpture: A guide to traditional methods. London: Dover Publications.
Widjanarko, B. (1983). Teknik reproduksi patung logam. Yogyakarta: ASRI Yogyakarta.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Abstrak : Jurnal Kajian Ilmu seni, Media dan Desain
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
